#Mixmeister express flange manuals#
#Mixmeister express flange software#
#Mixmeister express flange windows 7#
#Mixmeister express flange download#
#Mixmeister express flange mac#

Switch it to 'MASTER' to hear the Program mix. CUE SOURCE – Selects the audio that is sent to the headphones. iPod VOLUME – Adjusts the audio level on the iPod channel.ġ4. iPod CONTROLS – Functions as the controls for your iPod’s menus and Touchwheel while it is plugged into the mixer.ġ3. DOCK ADJUSTER – Turn this knob accordingly so your docked iPod rests against the support.ġ2. Gently rock the iPod back and forth over the connector when attaching or removing it.ġ1. Sliding this to the left plays Channel 1 and sliding to the right plays Channel 2.ġ0. CROSSFADER – Blends audio playing between Channels 1 and 2. CHANNEL FADER – Adjusts the audio level on the corresponding channel.ĩ. Input jacks are located on the rear panel (plus the USB port on the top panel).Ĩ. INPUT SELECTOR – Selects the input source to be routed to the corresponding channel. CHANNEL BASS – Adjusts the low (bass) frequencies of the corresponding channel.ħ. CHANNEL MID – Adjusts the mid-range frequencies of the corresponding channel.Ħ. CHANNEL TREBLE – Adjusts the high (treble) frequencies of the corresponding channel.ĥ. CHANNEL GAIN – Adjusts the channel’s pre-fader and preEQ gain level.Ĥ. BOOTH VOLUME – Adjusts the Booth output level.ģ. MASTER VOLUME – Adjusts the output volume of theĢ. CD OUTPUT (RCA) – To use MIXDECK with timecoded CDs, use standard RCA cables to connect this output to the interface for your digital DJ software.ġ. Note: Some turntables have a grounding wire built into the RCA connection and, therefore, nothing needs to be connected to the grounding terminal.ġ1. If you experience a low 'hum' or 'buzz', this could mean that your turntables are not grounded. GROUNDING TERMINAL – If using phono-level turntables with a grounding wire, connect the grounding wire to these terminals. If using a line-level device, such as a CD player or sampler, set this switch to 'LINE.'ġ0. If you are using phono-level turntables, set this switch to 'PHONO' to provide the additional amplification needed for phono-level signals. LINE | PHONO SWITCH – Flip this switch to the appropriate position, depending on the device connected to the AUX INPUTS. These inputs can accept both line and phono-level signals.ĩ. AUX INPUTS (RCA) – Connect audio sources to these inputs. The level of this output is based upon pre-master levels.Ĩ. RECORD OUTPUT (RCA) – Use standard RCA cables to connect this output to a recording device, such as a CD recorder or tape deck. The level of this output is controlled by the BOOTH VOLUME on the top panel.ħ. BOOTH OUTPUT (RCA) – Use standard RCA cables to connect this output to a booth monitoring system. The level of this output is controlled by the MASTER VOLUME on the top panel.Ħ. MASTER OUTPUT (RCA) – Use standard RCA cables to connect this output to a speaker or amplifier system. The level of this output is controlled with the MASTER VOLUME on the top panel.ĥ. MASTER OUTPUT (BALANCED) – Connect this low-impedance XLR output to a PA system or powered monitors. When turning off, always reverse this operation by turning off:Ĥ. Switch everything on in the following order:

Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.ĩ. Connect all stereo input sources as indicated in the diagram.ħ. Make sure all devices are turned off and all faders and gain knobs are set to 'zero.'Ħ.

Place mixer in an appropriate position for operation.ĥ. Study the connection diagram in this guide.Ĥ. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.ģ.

Make sure all items listed in the BOX CONTENTS section are included in the box.Ģ.

Registering your product ensures that we can keep you up- to-date with any new product developments and provide you with world-class technical support, should you run into any problems.ġ.

#Mixmeister express flange download#

You can find links to other useful Open Source audio and audio-visual applications, that you can download and use, in the Audacity Wiki.Please go to to register your MIXDECK.

Other Open Source Audio and Audio-Visual Applications

You may copy, distribute, modify and/or resell Audacity, under the terms of the GNU GPL.

To build Audacity yourself, download the source code.

#Mixmeister express flange software#

Although there are a number of sellers of Audacity software on ebay, Amazon, Microsoft Store and Apple Store, none of these sellers are affiliated to Audacity, and none have contributed in any way to the Audacity project.

#Mixmeister express flange manuals#

Source code and user manuals for some old versions are available on FossHub, as well as AppImages since version 3.0.3. For Linux, the appropriate version of Audacity for your operating system is usually included in your distribution’s repository.

#Mixmeister express flange mac#

For macOS 10.12 (Sierra) and earlier, legacy versions of Audacity are available on the Legacy Mac downloads page.

#Mixmeister express flange windows 7#

For Windows 7 and earlier, legacy versions of Audacity are available on the Legacy Windows downloads page.